PF9650S PANSAT Stacked C-Band LNBF
$59.99 each
$69.99 Includes Shipping within the 48 Cont. United States

This LNBF is the perfect solution for those Free-To-Air Satellite Installations where you have only 1 cable, but want to use Multiple Receivers.
You can bring the one cable inside and connect to a High Frequency Single Port Power Passive Splitter and then feed Multiple Receivers and
Set the LNBF setting in the Antenna Setup Menu to 5150/5750 or OCS or One Cable System and then all of the connected receivers can select
Vertical or Horizontal independently. You just need to make for sure that the receiver you are using offers these settings in the menu.

Input Frequency Range : 3.7 ~ 4.2 GHz

Output Frequency Range : 950 ~ 1450 MHz / 1550 ~ 2050MHz

LO. Frequency Range : 5.15 GHz +/- 2MHz, 5.75 GHz +/- 2MHz

Noise Temp.(@ + 25°C) : 35°K max.

Input VSWR : 2.5 : 1 Typ.

Image Rejection : 40 dBc Min.

Conversion Gain : 65 dB Typ.

Output VSWR : 2 : 1 Typ.

Gain Flatness : 6 dBp-p Max.

Gain Ripple(@per Channel) : +/- 0.75dB Max.

P1dB Gain Compression Point : +5 dBm Max

Output Impedance : 75 O

Leakage(@ Input Port) : -60 dBm Max.

Phase Noise : -80 dBc/Hz(@ 10KHz), -95 dBc/Hz(@ 100KHz), -110 dBc/Hz(@ 1 MHz)

Power Supply : +12 to +24V DC

Requires Current : 150 mA Max.

Operating Temperature : -30°C ~ +60°C

Storage temperature : -40°C ~ +80°C

Relative Humidity : 0% ~ 95% RH

Input Waveguide flange : WR-229

IF Output Connector : F-Type Female

Weight : 520g

PF9650S PANSAT Stacked C-Band LNBF
$59.99 each
$69.99 Includes Shipping within the 48 Cont. United States