| Welcome to "Ricks
Satellite" In Association with Gofastmotorsports.com |
| V-Box V Dish Mover with Remote Control |
DiSEqC POSITIONER TO
MOVE AN ACTUATOR ARM
Allows you to use
your MPEG2 Receiver with DiSEqC 1.0 or 1.2 commands to move a
36Volt DC actuator arm
$57.00
Includes Shipping
Includes
Shipping within the 48 Cont. United States
Actual price is 47.00 plus 10.00 Shipping and Handling
 |
 |
 |
| FUNCTIONS: |
| Compatible with DiSEqC 1.0 /1.2 Receiver or Any Receiver |
| Compatible with any Actuator or H-H Mount |
| 3 Digit LED Display |
| 99 Satellite Positions |
| Fine-tune EAST / WEST Buttons |
| Optional Remote Control Available |
| Overload Protection ( Auto-recovery ) |
| Anti-Noise Design |
| Short circuit and over load protection |
| Auto turn-off function |
| Re-synchronize Function |
| Includes a 22 key remote control |
| Specification: | |
| Model | V-BOX V |
| Input Voltage | 110 VAC / 60Hz |
| Output Voltage | 36 VDC |
| Output Power | 60W (Rated / Motor Cable) |
| Max. Output Current | 3A |
| Max. Power Consumption | 5W Standby, 90W (Max.) |
| Position Memories | 99 |
| Protocol | DiSEqC 1.0/1.2 |
| Operating Temp. | 5°C to 40°C (41°F to 104°F) |
| Storage Temp. | -20°C to 60°C (-4°F to 140°F) |
| Resynchronize Function | YES |
V-Box V Dish Mover
with Remote Control
$57.00
Includes Shipping
Includes
Shipping within the 48 Cont. United States
Actual price is 47.00 plus 10.00 Shipping and Handling
Ricks
Satellite
|
Ricks Satellite Home - Satellite Receivers - Satellite Systems
Satellite Dishes - LNBs/LNBFs - Feed Horns - Dish Movers - Actuators - Servo Motors
Signal
Combiners & Amplifiers - Multi
Switches & Diplexers - DiSEqC
Switches
Remotes - Coax Cable & Satellite
Ribbon - Installation
Accessories
Splitters
- Channel
Modulators & Video Senders
Last Update; 01/15/08 11:33 AM
Copyright by Ricks Satellite 2003-2008
